In 2026, concise study material respects your time. The Network Appliance Cisco and NetApp FlexPod Design Specialist set on PracticeVCE is built so that 277 practice questions cover the NS0-175 objectives without dragging you through padded filler.
Network Appliance NS0-175 Exam Syllabus Topics:
| Section | Weight | Objectives |
|---|---|---|
| Security & Management Tools | 5% | - Access control and security design - FlexPod management utilities - Troubleshooting methodology |
| Cisco UCS Compute Design | 15% | - Virtualization integration (VMware/Hyper-V) - UCS hardware and service profiles - Compute scalability and HA |
| NetApp Storage Design | 20% | - Data ONTAP architecture - Storage protocols: NFS, iSCSI, FC - Storage efficiency and data protection |
| FlexPod Networking Design | 25% | - Cisco Nexus switch configuration - Network redundancy and connectivity - VLAN, vPC, and QoS design |
| FlexPod Design | 35% | - FlexPod architecture overview - Workload and requirement analysis - Component selection and sizing - Best practices and support policies |
Answers About Network Appliance Cisco and NetApp FlexPod Design Specialist Preparation
The real NS0-175 exam gives you 90 minutes minutes to answer 55-65 questions. Practicing under the same constraints on the PracticeVCE engine makes the real pacing feel familiar.
Buying online raises fair concerns, so here are the facts: payment on PracticeVCE runs through the Credit Card platform, one of the most widely used payment networks in the world, and we are committed to protecting your privacy. Our support team is also available to answer any doubt before you buy, so you can set aside your concerns and decide with confidence.
The package includes 277 practice questions for the NS0-175 exam. Candidates often note that the study thoughts behind them are concise and easy to absorb, which keeps revision efficient rather than tedious.
To pass NS0-175 you need 64%-66%, and the official exam fee is $150-$300 USD. Knowing both figures early helps you plan your exam date and your practice target together.
Feedback from buyers is one of the strongest reasons new candidates trust us. Reviewers frequently mention passing smoothly and scoring well, and many describe the study thoughts as concise, easy to get, and definitely not boring. We would rather let their words speak than write our own slogans.
NetApp Certification Portal: register for NS0-175
Pearson VUE Registration: register for NS0-175
No formal prerequisites; recommended 6-12 months experience with data center infrastructure, networking, storage, and virtualization
NetApp FlexPod Design Training: Visit official page
- Cisco UCS Compute Design (15%)
- Security & Management Tools (5%)
- FlexPod Design (35%)
Spend more time on the topics that carry the most weight.
Network Appliance Cisco and NetApp FlexPod Design Specialist Sample Questions:
You received from a customer the requirements shown below.
25 servers
25GbE connectivity
NFS and iSCSI protocols
30 TB flash storage
50 TB hybrid storage
In this scenario, which FlexPod solution would satisfy the requirements?
- A. Cisco UCS 6332 Fabric Interconnect, Cisco B-Series servers, Cisco Nexus 9300 Series, NetApp AFF A400, and FAS8300
- B. Cisco UCS 6454 Fabric Interconnect, Cisco B-Series servers, Cisco Nexus 9300 Series, NetApp AFF A400, and FAS2750
- C. Cisco UCS 6324 Fabric Interconnect, Cisco B-Series servers, Cisco Nexus 9300 Series, NetApp AFF A400, and FAS2750
- D. Cisco UCS 6454 Fabric Interconnect, Cisco B-Series servers, Cisco Nexus 9300 Series, NetApp AFF A400, and FAS8300
Correct Answer: A 🗳️
A customer wants to use a Cisco Nexus 93180YC-FX switch to support the FC protocol for booting from SAN without having to deploy additional Cisco 900 Series MDS switches in their FlexPod Datacenter configuration.
In this scenario, what is required for this solution?
- A. The customer must directly connect the NetApp AFF system to the Cisco UCS Fabric Interconnects
- B. The customer must add an expansion FC module to the 93180YC-FX switch
- C. The customer must deploy the 93180YC-FX switch as part of a Cisco ACI fabric
- D. The customer must enable the FC license on the 93180YC-FX switch
Correct Answer: A 🗳️
Which of the following is a component of stateless computing with Cisco UCS?
- A. Utilization of identity information burned into the hardware
- B. Utilization of service profiles to apply SAN connectivity attributes
- C. Treating each server as a traditional rack mount server
- D. Operating System boot from server local disk
Correct Answer: B 🗳️
What is the maximum number of power supplies supported in a Cisco UCS 5108 blade server chassis?
- A. 1
- B. 4
- C. 3
- D. 2
Correct Answer: B 🗳️
Which hardware device should provide Fibre Channel services in a FlexPod design?
- A. NetApp FAS
- B. Cisco UCS 6248 Fabric Interconnect
- C. Cisco Nexus 5500
- D. Cisco Nexus 3000
Correct Answer: C 🗳️
Viewing page 1 out of 56 pages.
Viewing questions 1-5 out of 277 questions.
1529 Customer Reviews
