Authentic 350-501 Dumps With 100% Passing Rate Practice Tests Dumps
Cisco 350-501 Real Exam Questions Guaranteed Updated Dump from PracticeVCE
Related Certifications
- CCNP Service Provider
Cisco CCNP Service Provider proves your capability to implement service provider solutions. Achieving this certificate requires meticulous mastery of 350-501 exam concepts in addition to passing the concentration test of your liking. That being said, the full list of the concentration options associated with the CCNP Service Provider certification includes the following: Cisco 300-510 Implementing Cisco Service Provider Advanced Routing Solutions (SPRI), Cisco 300-515: Implementing Cisco Service Provider VPN Services (SPVI), Cisco 300-535: Implementing Automation for Cisco Service Provider Solutions (SPAUTO).
- Cisco Certified Specialist – Service Provider Core
Cisco Certified Specialist – Service Provider Core is a creation of the new Cisco curriculum which states that every professional-level exam now earns the candidates a Specialist title alongside the accreditation they are going to obtain. In a nutshell, this is a deserved recognition for your accomplishments at the professional level regardless of your further path.
- CCIE Service Provider
Cisco CCIE Service Provider lies at the pinnacle of the Cisco Service Provider certification track and is exactly the step to make after attaining the CCNP Service Provider certificate. It confirms one's expert-level mastery of Service Provider technologies. To qualify for it, you must pass a combination of two exams a core 350-501 test that focuses on the fundamentals of the field and a hands-on lab exam that checks the mastery of the service provider solutions through a practical environment. The lab exam, in this case, is CCIE Service Provider v5.0.
Topics of Cisco 350-501: Implementing and Operating Cisco Service Provider Network Core Technologies Exam
These core topics listed below are general recommendations for the material that is likely to be used for the 350-501 exam test. However, on any delivery of the test, other similar topics could also appear. The guidelines below can update at any time without notice to better represent the contents of the exam and for clarity purposes. It is recommended that, where possible, the applicant use these courses and/or other resources to provide background information on the exam objectives. Following topics can also be found in the 350-501 exam dumps:
- Implementing OSPF
- Implement Basic BGP Routing
- Implement Segment Routing
- Implementing MPLS
- Configuring L2VPN Services
- Implement Ethernet over MPLS (EoMPLS)
- Filter BGP Prefixes Using RPL
- Describing QoS Architecture
- Implementing BGP
- Implementing Cisco MPLS Traffic Engineering
- Describing Service Provider Network Architectures
- Implementing Multicast
- Describing Segment Routing
- Configuring L3VPN Services
- Describing VPN Services
- Implementing Management Plane Security
- Implementing QoS
- Implementing IS-IS
- Implement Cisco MPLS Traffic Engineering (TE)
- Implementing High Availability in Networking
- Transitioning to IPv6
- Implement Integrated IS-IS Routing
- Implement MPLS in the Service Provider Core
- Introducing Cisco NSO
- Implementing Route Maps and Routing Protocol for LLN )Low-Power and Lossy Networks), RPL
- Implementing Data Plane Security
- Implement OSPF Routing
- Deploy Cisco IOS XR and IOS XE Basic Device Configuration
- Introducing Network Programmability
- Implementing Automation and Assurance
- Implement Remotely Triggered Black Hole (RTBH) Filtering
NEW QUESTION # 145
Refer to the exhibit.
Which configuration must be applied to each of the four routers on the network to reduce LDP LIB size and advertise label bindings for the /32 loopback IP space only?
- A. Option D
- B. Option B
- C. Option A
- D. Option C
Answer: C
NEW QUESTION # 146
A network engineer is configuring RIP as the routing protocol between multiple PEs and CEs. The engineer must avoid advertising the same routes back to their sources. Which action should be performed on the routers to accomplish this task?
- A. Define the site of origin on each interface.
- B. Enable bidirectional forwarding detection on each device.
- C. Define VRFs on each device to separate the traffic.
- D. Configure a different route distinguisher for each prefix.
Answer: D
NEW QUESTION # 147
Drag and drop the message types from the left onto the target field of the message originator on the right.
Answer:
Explanation:
NEW QUESTION # 148
Refer to the exhibit.
Refer to the exhibit. An Ethernet access provider is configuring routers PE-1 and PE-2 to provide E-Access EVPL service between UNI and ENNI. ENNI service multiplexing is based on 802.1ad tag 150, and service-multiplexed UNI is based on 802.1q tag 10. Which EFP configurations must the provider implement on PE-1 and PE-2 to establish end-to-end connectivity between CE-1 and CE-2?
- A. On PE-1:
interface GigabitEthernet2
service instance 100 ethernet
encapsulation dot1ad 150
rewrite ingress tag pop 1 symmetric
On PE-2:
interface GigabitEthernet2
service instance 2 ethernet
encapsulation dot1q 10 - B. On PE-1:
interface GigabitEthernet2
service instance 100 ethernet
encapsulation dot1q 150
rewrite ingress tag pop 1 symmetric
On PE-2:
interface GigabitEthernet2
service instance 2 ethernet
encapsulation dot1q 10 - C. On PE-1:
interface GigabitEthernet2
service instance 100 ethernet
encapsulation dot1ad 150 dot1q 10
rewrite ingress tag pop 2 symmetric
On PE-2:
interface GigabitEthernet2
service instance 2 ethernet
encapsulation dot1q 10 - D. On PE-1:
interface GigabitEthernet2
service instance 100 ethernet
encapsulation dot1ad 150
rewrite ingress tag pop 1 symmetric
On PE-2:
interface GigabitEthernet2
service instance 2 ethernet
encapsulation dot1q 10
Answer: C
Explanation:
rewrite ingress tag pop 1 symmetric
NEW QUESTION # 149
Refer to the exhibit.
Which two topology changes happen to the IS-IS routers? (Choose two.)
- A. R1 and R2 are Level 2 neighbours.
- B. All four routers are operating as Level 1-2 routers.
- C. All four routers are operating as Level 1 routers only.
- D. R1 and R4 are Level 2 neighbours.
- E. All four routers are operating as Level 2 routers only.
Answer: A,B
NEW QUESTION # 150
Why do packet loops occur during the configuration of BIDIR-PIM?
- A. No interface for carrying traffic for multicast groups has been configured.
- B. The router has not been configured to advertise itself.
- C. The network is partially upgraded to support BIDIR-PIM.
- D. The network does not support BIDIR-PIM.
Answer: C
Explanation:
Section: Services
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9600/software/release/16-12/ configuration_guide/ip_mcast_rtng/b_1612_ip_mcast_rtng_9600_cg/configuring_pim.html
NEW QUESTION # 151
Refer to the exhibit.
Refer to the exhibit. What is the purpose of this JSON script?
- A. It deletes a user's authentication record.
- B. It updates a user authentication record.
- C. It confirms a user's login credentials.
- D. It changes the existing password.
Answer: D
NEW QUESTION # 152
Refer to the exhibit.
ASN 64501 currently reaches the networks under the 10.0.0.0/8 prefix via the North_B router, which is a slow backup link. The administrator of ASN 64502 wants traffic from ASN 64501 to 10.0.0.0/8 to travel via the primary link North_A.
Which change to the network configuration accomplishes this task?
- A. Advertise the 10.0.0.0/8 prefix through North_B and specific subnets through North_A
- B. Set a lower MED between North_B and South_B
- C. Set a Lower Weight value for incoming traffic on North_A
- D. Set a higher local preference between North_A and South_A
Answer: B
NEW QUESTION # 153
Drag and drop the technologies from the left onto the correct definitions on the right.
Answer:
Explanation:
NEW QUESTION # 154
Refer to the exhibit. To protect in-band management access to CPE-R7, an engineer wants to allow only SSH management and provisioning traffic from management network 192.168.0.0/16.
Which infrastructure ACL change must be applied to router PE-R9 to complete this task?
- A.
- B.
- C.
- D.
Answer: C
NEW QUESTION # 155
Refer to the exhibit.
An engineer must configure router R2 as the new P router in the network. Which configuration must be applied to R2 to enable LDP-IGP Sync on its L2 IS-IS adjacencies?
- A. Option A
- B. Option B
- C. Option D
- D. Option C
Answer: C
NEW QUESTION # 156
Refer to the exhibit.
Router 4 is added to the network and must be in the same area as router 1. Which NET should the engineer assign?
- A. 49.0001.0000.0000.0004.00
- B. 49.0011.0000.0000.0002.00
- C. 49.0111.0000.0000.0001.00
- D. 49.0011.0000.0000.0003.00
Answer: D
NEW QUESTION # 157
network the network is already using PlM-SM with a static RP that supports a high-bandwidth.
video-based training application that s heavily used by the employees, but excessive bandwidth usage is a concern How must the engineer update the network to provide a more efficient multicast implementation'?
- A. Configure IGMP to manage the multicast hosts on each LAN
- B. implement BSR to support dynamic RP notification.
- C. Implement STP to improve switching performance for multicast data.
- D. Deploy ICMP to Improve multicast reachability across the network using static RP.
Answer: A
NEW QUESTION # 158
Drag and Drop Question
Drag and drop the functionalities from the left onto the correct target fields on the right.
Answer:
Explanation:
NEW QUESTION # 159
Which two PHY modes are available to implement an IOS XR Gigabit Ethernet interface interface? (Choose two.)
- A. LAN
- B. SONET
- C. MAN
- D. WAN
- E. WDWM
Answer: B,E
NEW QUESTION # 160
An engineer is trying to implement BGP in a multihomed architecture. What must the engineer configure to influence inbound path selection?
- A. A route map with AS-PATH attribute to control the inbound traffic
- B. A route map with WEIGHT attribute to control the inbound traffic
- C. An offset list to set the metric for routes received from neighboring autonomous systems
- D. An access list to identify traffic and enable it on both of the provider-facing interfaces
Answer: A
Explanation:
Section: Networking
NEW QUESTION # 161
Refer to the exhibit. The network engineer who manages ASN 65001 is troubleshooting suboptimal routing to the 198.18.15.0/24 prefix. According to the network requirements:
- Routing to IP destinations in the 198.18.15.0/25 block must be
preferred via the EDGE-1 PE.
- Routing to IP destinations in the 198.18.15.128/25 block must be
preferred via the EDGE-2 PE.
- More specific prefixes of the 198.18.15.0/24 block must not be
advertised beyond the boundaries of ASN 64611.
- Routing to 198.18.15.0/24 must be redundant in case one of the
uplinks on INT-R1 fails.
Which configuration must the network engineer implement on INT-R1 to correct the suboptimal routing and fix the issue?
- A. configure terminal
route-policy ASN65001-SPECIFIC-OUT
if destination in (198.18.15.0/25) then
set community (no-export, peeras:65001)
done
endif
if destination in (198.18.15.0/24) then
prepend as-path 65001 3
done
endif
drop
end-policy
!
router bgp 65001
neighbor 100.65.0.1
address-family ipv4 unicast
route-policy ASN65001-SPECIFIC-OUT out
end - B. configure terminal
route-policy ASN65001-SPECIFIC-OUT
if destination in (198.18.15.0/25) then
set community (internal, peeras:65001)
done
endif
if destination in (198.18.15.0/24) then
done
endif
drop
end-policy
!
router bgp 65001
neighbor 100.65.0.1
address-family ipv4 unicast
route-policy ASN65001-SPECIFIC-OUT out
end - C. configure terminal
route-policy ASN65001-SPECIFIC-OUT
if destination in (198.18.15.0/25) then
set community (no-export, peeras:65001)
done
endif
if destination in (198.18.15.128/25) then
prepend as-path 65001 3
done
endif
drop
end-policy
!
router bgp 65001
neighbor 100.65.0.1
address-family ipv4 unicast
route-policy ASN65001-SPECIFIC-OUT in
end - D. configure terminal
route-policy ASN65001-SPECIFIC-OUT
if destination in (198.18.15.0/25) then
set community (no-advertise, peeras:65001)
done
endif
if destination in (198.18.15.128/25) then
prepend as-path 65001 3
done
endif
drop
end-policy
!
router bgp 65001
neighbor 100.65.0.1
address-family ipv4 unicast
route-policy ASN65001-SPECIFIC-OUT out
end
Answer: B
NEW QUESTION # 162
Refer to the exhibit.
What is the effect of this configuration?
- A. The two routers fail to form a neighbor relationship because they have different IS-IS area types.
- B. The two routers fail to form a neighbor relationship because the authentication configuration is missing
- C. The two routers fail to form a neighbor relationship because their system IDs are different.
- D. The two routers successfully form a neighbor relationship.
Answer: D
NEW QUESTION # 163
......
Cisco 350-501 exam is a challenging but rewarding certification that validates the knowledge and skills of professionals in implementing and operating service provider network technologies. Candidates who pass 350-501 exam can gain recognition for their expertise, advance their careers, and open up new job opportunities. With the right preparation and training, candidates can pass 350-501 exam and gain the Cisco Certified Specialist - Service Provider Core certification.
Verified Pass 350-501 Exam in First Attempt Guaranteed: https://killexams.practicevce.com/Cisco/350-501-practice-exam-dumps.html