Jan-2024 CheckPoint 156-835 Actual Questions and 100% Cover Real Exam Questions
156-835 Free Exam Questions and Answers PDF Updated on Jan-2024
What are the steps to follow for the registration for the CheckPoint 156-835 Exam
Click Register Now to get started.
Review the information about the exam, and make sure you are eligible to register for the exam.
Enter your information into the required fields and click Next Step.
Finally, select your exam date, time, location and pay the fee online using a credit card or PayPal account.
Once you have paid for your exam, you will receive an email within 2 business days with instructions on how to download your test results within three business days after payment has been processed by CheckPoint.
To pass the CheckPoint 156-835 exam, candidates need to have a thorough understanding of Check Point Maestro architecture, deployment, and management. They should also be familiar with the best practices for deploying and managing Check Point Maestro solutions. 156-835 exam tests the candidates' abilities to install and configure Check Point Maestro, manage and troubleshoot Maestro components, and optimize Maestro performance.
NEW QUESTION # 30
What is the purpose of RJ-45 connectors located at the front panel of the Orchestrator MHO-170?
- A. Reserved for internal purposes. Not in use
- B. Out-of-band interface for access to Orchestrator itself and Serial Console connector
- C. Two Out-of-band interfaces for access to Orchestrator itself
- D. 1Gbps connectivity for Security Groups
Answer: B
NEW QUESTION # 31
What is the Iterator process?
- A. Iterator is the process that runs on the Orchestrator and calculates a distribution in case of Appliance failure
- B. Iterator is the process that follow Appliance recovery and simulates what was a distribution if recovered Appliance was alive
- C. Iterator is the process that simulates distribution in case of Appliance failure
- D. Iterator is the process that runs on the Orchestrator and calculates a distribution in case of Appliance recovery
Answer: A
NEW QUESTION # 32
What cannot be learned from the output of lldpctl?
- A. Distribution mode
- B. Orchestrator's IP
- C. Serial number of Appliance
- D. Appliance model
Answer: A
NEW QUESTION # 33
What is an uplink interface used for?
- A. To connect in between Orchestrators
- B. To connect appliances to customer's infrastructure
- C. To connect in between appliances
- D. To connect Orchestrators to customer's infrastructure
Answer: B
NEW QUESTION # 34
What kinds of transceivers are supported on Orchestrator MHO-140?
- A. SFP+, SFP28, QSFP
- B. SFP, SFP+, SFP28
- C. SFP, QSFP, QSFP28
- D. SFP, SFP+, QSFP, QSFP28
Answer: D
NEW QUESTION # 35
There's a 23800 appliance with quad NIC in slot 5. What would be the name of port 3 on this NIC?
- A. ethsBP5-03
- B. ethBP3-05
- C. ethsBP-05
- D. ethsBP3-05
Answer: A
NEW QUESTION # 36
In case of Correction, where is information about Owner stored?
- A. In Connection tables of all Appliances participating in Correction Layer flow
- B. In Correction table of Target Appliance
- C. In Connection table of Target Appliances
- D. In Correction tables of all Appliances participating in Correction Layer flow
Answer: A
NEW QUESTION # 37
Which setting is required in order to connect an appliance with 40Gbps downlink interface and DAC to the Orchestrator MHO-140?
- A. On Orchestrator: Change port type from uplink to downlink
- B. On Appliance: Change a port speed to 10Gbps
- C. No change required
- D. On Orchestrator: Change QSFP mode from 100Gbps to 40Gbps
Answer: A
NEW QUESTION # 38
In case of VSX: What is the right command to see overall performance details of all Appliances within the Security Group and all Virtual Systems?
- A. asg pert -v -p
- B. asg pert -v
- C. asg pert -vs all -v -vv
- D. asg pert -vs enabled -p
Answer: C
NEW QUESTION # 39
What is the difference between Dual-Site and Multi-Room?
- A. This is the same
- B. Multi-Room is a kind of Dual-Site deployment within the same building
- C. Multi-Room is Active / Standby and Dual-Site is Active / Active
- D. Multi-Room is a Single-Site deployment where all Appliances are connected to both orchestrators
Answer: B
NEW QUESTION # 40
What command should be used for collecting diagnostic information about the orchestrator?
- A. asg pert -v
- B. orch_info
- C. cpview
- D. cpinfo
Answer: B
NEW QUESTION # 41
Where should sx_api_ports_dump,py command be ran?
- A. Management server
- B. Orchestrator
- C. Security Group
- D. SMO Appliance
Answer: B
NEW QUESTION # 42
What kind of cluster Dual-Site can be compared to?
- A. Active-Active
- B. Active-Standby only
- C. Active-Standby or VSLS
- D. VSLS only
Answer: A
NEW QUESTION # 43
What cannot be a reason for DETACHED status of Appliance when running asg monitor command?
- A. Appliance reboots
- B. Appliance is a member of Security Group, but currently disconnected
- C. Appliance installed with R80.20
- D. There's an issue with Downlink cable
Answer: C
NEW QUESTION # 44
What command will be used for updating fwkern.conf file on all Appliances within Security Group?
- A. g_update_kernel
- B. g_all update_conf_file
- C. g_update_conf_file
- D. vi
Answer: B
NEW QUESTION # 45
What is the purpose of g_tcpdump command?
- A. The same as tcpdump, just on Scalable Platform
- B. Collects traffic dump from CIN network
- C. Collects traffic dump from Sync network
- D. Collects traffic dump from all Active Appliances within Security Group
Answer: D
NEW QUESTION # 46
What will happen in case of NAT of the traffic passing through Management network?
- A. This traffic will not pass correction, since it will be dropped
- B. This traffic will pass with no inspection
- C. Since Management traffic is always going to SMO, it will take a care for Correction Layer and will re-distribute traffic to other Appliances
- D. Orchestrator will disable NAT and traffic will pass with no issue
Answer: A
NEW QUESTION # 47
Splitter cannot be used __________.
- A. To connect single port on orchestrator to the same Appliance
- B. To connect single port on Appliance to multiple ports on the orchestrator
- C. To connect single port on orchestrator to multiple port on external switch
- D. To connect single port on orchestrator to multiple Appliances
Answer: B
NEW QUESTION # 48
What is the distribution mode?
- A. Distribution mode means selected algorithm for traffic distribution in between Orchestrators
- B. Distribution mode means selected algorithm for traffic distribution in between Appliances
- C. Distribution mode is the same as QSFP mode
- D. Distribution mode is how the Orchestrator distributes traffic in between Security Groups
Answer: B
NEW QUESTION # 49
When running asg perf -v in a Dual-Site environment, we can see only Appliances from one of the sites. That means we're working in:
- A. Active /Active
- B. VSLS mode
- C. Active / Standby HA mode
- D. This is not Dual-Site, in Dual-Site we always see Appliances from both sites
Answer: C
NEW QUESTION # 50
......
The Check Point Certified Maestro Expert certification exam is a valuable credential for IT professionals who want to advance their careers in the field of cybersecurity. It demonstrates their expertise in managing complex security infrastructures and their ability to use Check Point Maestro to provide a unified view of the entire security infrastructure. Check Point Certified Maestro Expert certification is recognized globally and is highly regarded by employers in the IT industry.
CheckPoint 156-835 Real 2024 Braindumps Mock Exam Dumps: https://killexams.practicevce.com/CheckPoint/156-835-practice-exam-dumps.html